Dirt-Devil Swivel Glide Vacuum Cleaner Manual

The Dirt-Devil Swivel Glide Vacuum Cleaner is designed for efficient cleaning with its lightweight design and powerful suction. It features a swivel steering mechanism for easy maneuverability, a bagless dirt cup for easy emptying, and multiple attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Swivel steering, bagless dirt cup, multiple attachments including crevice tool and dusting brush.

Feature	Description
Swivel Steering	Allows for easy maneuvering around furniture and obstacles.
Bagless Design	Easy to empty dirt cup with no bags to replace.
HEPA Filter	Traps allergens and dust for cleaner air.
Attachments	Includes crevice tool, dusting brush, and upholstery tool.
Power Cord	Long cord for extended reach without needing to unplug.

Installation

Unpack the vacuum cleaner and check all components. Place the vacuum on a flat surface.

Attach the handle: Align and secure the handle to the main body.
Install attachments: Click the desired attachment into place.
Plug in the vacuum: Ensure the power cord is securely connected to an outlet.

WARNING! Ensure the vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and attachments.

Check the dirt cup: Ensure it is empty and properly installed.
Adjust height settings: Set the brush height according to the floor type.
Test the vacuum: Turn it on and check for proper suction and operation.

CAUTION! Do not operate the vacuum on wet surfaces.

Specifications

Model: Dirt-Devil Swivel Glide.
Power: 12 amps.
Weight: 8 lbs.
Cord Length: 25 feet.
Filtration: HEPA filter.
Capacity: 1.5 liters dirt cup.
Attachments: Crevice tool, dusting brush, upholstery tool.

Controls and Settings

Access controls on the handle: Power switch, height adjustment dial.

Attachments: Easily switch attachments by pressing the release button.

Maintenance: Regularly check and clean the filter and dirt cup for optimal performance.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Align the attachment with the connector.
Push firmly until it clicks into place.
To remove, press the release button and pull the attachment off.

Tip: Store attachments in a designated area for easy access.

Operating the Vacuum

To start cleaning, turn on the vacuum and guide it across the floor.

Adjust the height setting based on the surface type.
Use the attachments for corners and upholstery.
Empty the dirt cup when full for optimal suction.

WARNING! Do not block the suction inlet during operation.

Maintenance and Care

Regular maintenance ensures longevity and performance.

Clean the filter monthly; replace if necessary.
Empty the dirt cup after each use.
Check for blockages in hoses and attachments.

CAUTION! Always unplug the vacuum before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unplugged or faulty outlet	Check power connection and outlet.
Poor suction	Full dirt cup or clogged filter	Empty dirt cup and clean filter.
Strange noise	Blocked hose or damaged brush	Inspect for blockages and check brush condition.
Attachments not working	Improper connection	Ensure attachments are securely connected.

Reset: If issues persist, refer to customer support.

Service: Contact Dirt-Devil customer service for assistance.