Dirt-Devil LET-S GO UD70170 Vacuum Cleaner Manual

The Dirt-Devil LET-S GO UD70170 is a powerful and compact vacuum cleaner designed for efficient cleaning of various surfaces. It features a lightweight design, easy maneuverability, and a range of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, powerful suction, multiple attachments, easy-to-empty dust cup, and washable filter.

Feature	Description
Lightweight Design	Easy to carry and maneuver around the house
Powerful Suction	Efficiently picks up dirt and debris from various surfaces
Multiple Attachments	Includes crevice tool, dusting brush, and upholstery tool
Easy-to-Empty Dust Cup	Quickly dispose of collected dirt without mess
Washable Filter	Reusable filter that can be cleaned for long-term use

Installation

Unpack the vacuum and inspect contents. Ensure all parts are included.

Attach the handle to the main body until it clicks into place.
Connect any necessary attachments based on your cleaning needs.
Plug the vacuum into a power outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check the dust cup and filter are properly installed.
Choose the appropriate attachment for the surface you will clean.
Plug in the vacuum and turn it on using the power switch.

CAUTION! Do not operate the vacuum without the dust cup or filter in place.

Specifications

Model: Dirt-Devil LET-S GO UD70170
Power: 10 Amps
Weight: 8 lbs
Cord Length: 25 feet
Dust Capacity: 1.5 liters
Filter Type: Washable HEPA filter
Attachments: Crevice tool, dusting brush, upholstery tool

Controls and Settings

Access the power switch and suction control located on the handle. Use the attachment release button to switch between tools.

Tip: Adjust suction power based on the surface being cleaned for optimal performance.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Align the attachment with the nozzle and push until it clicks.
To remove, press the attachment release button and pull the accessory off.

Tip: Use the appropriate attachment for the best cleaning results.

Operating the Vacuum

To operate, plug in the vacuum, turn it on, and begin cleaning.

Start from one corner of the room and work your way across.
Use slow, deliberate movements for effective dirt pickup.
Empty the dust cup when full for optimal performance.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filter every month and replace if damaged.
Empty the dust cup after each use.
Check for blockages in the hose and attachments regularly.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.dirtdevil.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged filter or dust cup	Clean or replace filter; empty dust cup.
Strange noise	Blocked hose	Inspect and clear any blockages in the hose.
Attachments not fitting	Incorrect alignment	Ensure attachments are aligned properly before connecting.

Reset: If issues persist, refer to the customer support section.

Service: 1-800-321-1134; www.dirtdevil.com