Dirt-Devil Infinity Rebel 52 DD 5550 Vacuum Cleaner Manual

The Dirt-Devil Infinity Rebel 52 DD 5550 is a powerful and versatile vacuum cleaner designed for efficient cleaning on various surfaces. It features a lightweight design, a powerful motor, and a range of attachments for different cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Lightweight design, powerful suction, multiple attachments, easy-to-empty dust container, and washable filters.

Feature	Description
Lightweight Design	Easy to maneuver and carry around the house.
Powerful Suction	Efficiently picks up dirt and debris from various surfaces.
Multiple Attachments	Includes crevice tool, dusting brush, and upholstery nozzle.
Easy-to-Empty Dust Container	Quickly dispose of collected dirt without mess.
Washable Filters	Reusable filters that can be easily cleaned.

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle: Align and secure the handle to the vacuum body.
Connect accessories: Attach desired cleaning tools to the hose.
Plug into power: Ensure the vacuum is plugged into a suitable outlet.

WARNING! Ensure the vacuum is turned off when connecting or disconnecting accessories.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and attachments.

Check the dust container: Ensure it is empty and properly attached.
Install filters: Make sure filters are clean and correctly positioned.
Adjust height settings: Set the vacuum height according to the surface type.

CAUTION! Do not operate the vacuum without the dust container or filters in place.

Specifications

Model: Dirt-Devil Infinity Rebel 52 DD 5550.
Power: 12 amps.
Weight: 8 lbs.
Dust Capacity: 2 liters.
Filtration: Washable HEPA filter.
Attachments: Crevice tool, dusting brush, upholstery nozzle.
Power Cord Length: 25 feet.

Controls and Settings

Access power switch and height adjustment settings on the vacuum body. Use the hose and attachments for various cleaning tasks.

Controls: Power switch, height adjustment dial, and accessory storage.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Align the accessory with the hose opening.
Push firmly until it clicks into place.
To remove, press the release button and pull the accessory off.

Tip: Use the appropriate attachment for the surface being cleaned.

Operating the Vacuum

To operate the vacuum, follow these steps:

Turn on the vacuum using the power switch.
Adjust the height setting if necessary.
Begin cleaning by moving the vacuum back and forth across the surface.
Use attachments for corners and edges.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance ensures optimal performance.

Empty the dust container after each use.
Clean or replace filters as needed.
Check for blockages in the hose and attachments.

CAUTION! Always unplug the vacuum before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	No power	Check power cord and outlet.
Poor suction	Full dust container or clogged filter	Empty dust container and clean filters.
Strange noise	Blockage or loose parts	Check for blockages and secure all parts.
Overheating	Clogged filter or dust container	Turn off and allow to cool; clean filters and container.

Service: For further assistance, contact customer support.